Deadpool

M1 Body
DareDevil head
DareDevil suit
DareDevil Gloves
DareDevil belt
Mr. Fantastic boots (optional)
Black sharpie marker
Red, White and Black paint
Sculpy

 1) Sand down horns on head and sculpt over mouth.
 2) Boil head to cure sculpy, then paint the head red. 
 3) Paint eyes and mask.
 4) Cut hands off gloves to make cuffs.
 5) Turn cuffs inside out and sew to sleeves.
 7) Remove DD from suit using nail polish remover.
 8) Sew leg holes shut or paint Mr. Fantastic boots red.
 9) Redress figure, fold cuffs down. 9) Replace hands, paint red.
10) Add belt (can shorten by drilling new hole).
11) mark and fill in Black areas on costume with Sharpe marker
    (Takes several coats)


Flash (modern Wally West)

M1 Body
DareDevil head
DareDevil suit
DareDevil Gloves
Thor Boots
Yellow craft foam
Yellow, Red, White and Black paint
Sculpy
2 sided sewing tape.

 1) Sand down horns on head and sculpt ear bolts.
 2) Boil head to cure sculpy, then paint the head (not face) red.
 3) Paint eyes and bolts. 
 4) Cut hands off gloves to make cuffs.
 5) Turn cuffs inside out and sew new tighter seam   (move seam in 1/4 inch)
 6) Cut belt from craft foam. (Note: middle has a V shape)
 7) Remove DD from suit using nail polish remover.
 8) Redress figure, place cuffs over wrists (hands must be removed)
 9) Replace hands, paint red and add yellow bolts to cuffs.
10) Add belt (can glue it or glue snaps to it).
11) Cut tops off  Thor boots and paint yellow.
12) Print out Flash emblem on paper, cut out and attach to
    chest with 2 sided tape.

Flash (Silver Barry Allen)

M1 Body
Cpt. America head
DareDevil suit
DareDevil shorts
DareDevil Gloves
DareDevil or vision boots
Yellow craft foam
Yellow, Red, White and Black paint
Sculpy
2 sided sewing tape.

 1) Sand down or cut off wings on head and sculpt ear bolts.
 2) Boil head to cure sculpy, then paint the head (not face) red.
 3) Paint bolts. 
 4) Cut hands off gloves to make cuffs.
 5) Turn cuffs inside out and sew new tighter seam
   (move seam in 1/4 inch)(note cuffs should be shorter than Wally's)
 6) Cut belt from craft foam. (note: straight no V in front)
 7) Remove DD from suit using nail polish remover.
 8) Redress figure, place cuffs over wrists (hands must be removed)
 9) Replace hands, paint red and add yellow bolts to cuffs.
10) Add belt (can glue it or glue snaps to it).
11) Paint DD boots yellow (note: no need if you use vision boots)
12) Print out Flash emblem on paper(note emblem should be large than Wally's),
    cut out and attach to chest chest with 2 sided tape.

Flash (Golden Jay Garrick)

M1 Body
Thor head
Thor Helmet
Cpt. America suit
Red Lycra or Thor Cape
Cpt. America head wings (see Barry above)
DareDevil boots
Silver paint
2 sided sewing tape.

 1) Remove Thor helmet, them cut off top of head just below hair.
 2) Cut large wings and spike off of helmet, trim up brim.
 3) Glue helmet back on head (will cover the hole) and paint Silver.
 4) Glue Cpt. America wings on the helmet.
 5) Sew red top using lycra or Thor cape. (See patterns)
 6) Cut top off of Cpt. America suit (trim next to belt and cut won't show)
 7) Redress figure and cut out Yellow bolt from paper,
    attach with 2 sided tape.